Bobcat Overheating Causes and Guide to Choosing the Right Coolant

Bobcat is our reliable partner when we are working. But once Bobcat equipment has an overheating problem, it will bring trouble to our work. So, what causes Bobcat to overheat? And what coolant should we use in daily maintenance? Let's unravel these mysteries together and keep your Bobcat heavy-duty equipment in tip-top shape!

 

What Causes a Bobcat to Overheat?

Bobcat equipment overheating problems can cause headaches, especially in hot working environments. First, let's look at a few common causes:

1. Insufficient Coolant

If there is not enough coolant, the Bobcat equipment engine will not be able to dissipate heat effectively. In most cases, this is due to leakage, evaporation, or failure to add coolant in time. Check the coolant level regularly to make sure it is in the proper range.

 

2. Clogged Radiator

The radiator is a key component in maintaining engine temperature. If the radiator is damaged on the inside or has dirt and debris on the outside, it will affect its ability to dissipate heat. Cleaning the radiator can effectively prevent overheating problems.

 

3. Water Pump Failure

The purpose of the water pump is to circulate the coolant. If the water pump is damaged or worn out, the coolant cannot flow properly. This will eventually cause the Bobcat engine to overheat.

 

4. Excessive Engine Load

Bobcat equipment working under high load for a long time will cause the engine to produce too much heat. Users can try to reduce the load of Bobcat equipment or adjust the working mode. This can reduce the pressure of the Bobcat engine.

 

5. Environmental Factors

Hot weather or humid conditions can increase the risk of engine overheating. When working in these conditions, take care to increase the frequency of coolant monitoring.

 

Understanding these causes can help prevent Bobcat overheating problems. If your Bobcat frequently experiences overheating problems in hot environments, it may be time to consider replacing the coolant and other engine parts. The MyMROmarts online store carries types of diesel fuel filters. Choosing the right filter for your Bobcat equipment model can help improve its performance.

 

What Coolant Can I Use in Bobcat?

Choosing the right coolant is important to maintain the performance of your Bobcat. When selecting a coolant, pay attention and check the instructions on the product label. Typically, Bobcat heavy-duty equipment uses a special glycol-based coolant. It has good anti-freeze and anti-boil properties. Specifically, the following types of coolants are suitable for Bobcat heavy-duty equipment.

 

1. Glycol Coolant

This is the most common choice and has excellent thermal conductivity and corrosion resistance.

 

2. Long-Lasting Coolants

Some long-lasting coolants contain additives that inhibit corrosion. This protects the engine for a longer time and reduces the frequency of replacement. These coolants perform well in high-temperature environments.

 

3. Environmentally Friendly Coolants

With the increase in environmental awareness, there are some environmentally friendly coolants on the market. They are usually non-toxic and biodegradable, making them environmentally friendly. If you value the environment, this type of product is also a good choice.

 

To summarize, understanding what causes Bobcat to overheat and choosing the right coolant is essential knowledge for every Bobcat heavy-duty application user. Hopefully, this article will help you take better care of your Bobcat so that it always performs well on the job!