Case 580C Backhoe Loader Usage Considerations

The Case 580C backhoe loader is a powerful piece of construction machinery with a wide range of performance specifications. In order to realize its full potential and ensure safe and efficient operation, users need to pay attention to some key usage matters. Below are some suggestions and considerations for using the Case 580C Backhoe Loader:

 

1. Traction:

The Case 580C adopts a 2-wheel drive (2 WD) system, and the operator should select the appropriate drive mode according to the terrain and project requirements when using it.

 

2. Standard Digging Parameters:

The standard digging parameters are: standard digging depth of 13.98 feet and standard swing radius of 17.72 feet. These parameters should be carefully checked prior to operation to ensure that they meet specific project requirements.

 

3. Extended Digging Parameters:

Extended digging parameters may be used when greater digging depth and reach is required, including an extended digging depth of 17.98 feet and an extended radius of gyration of 21.79 feet.

 

4. transportation and storage:

When transporting and storing the backhoe loader, ensure that the machine height does not exceed 10.8 feet to accommodate standard shipping restrictions.

 

5. wheelbase and unloading height:

Check the wheelbase of the backhoe to ensure machine stability. Also, note that the maximum unloading height is 8.6 feet to avoid collisions with the surroundings.

 

6. lifting capacity:

The lifting capacity of Case 580C is 4698.06 lbs at Full Height (FH), users need to be careful when carrying loads to ensure safe lifting.

 

7. Bucket Bar Breaking Force and Digging Depth:

The bucket bar breaking force is 7200 lbs, users need to adjust the operation according to different working conditions to ensure the stability of digging and loading process. At the same time, the digging depth is taken into account, especially in the case of needing to extend the digging depth.

 

8. Operating weight and engine power:

The Case 580C has an operating weight of 12,000 lbs. and a gross weight of 14,250 lbs. Considering the machine's GVWR and engine power of 57 hp, the operator should select the appropriate operating mode for the project requirements.

 

9. backhoe depth and gross weight:

Rear digging depth is 174 inches and GVWR is 14,250 lbs. these parameters require special attention during excavation and earthmoving works.

 

10. operation and maintenance:

Prior to operation, carefully familiarize yourself with the operator's manual for basic machine operation and maintenance procedures. Ensure that a machine inspection is performed prior to each operation to ensure that all systems are functioning properly.

 

As a multi-functional construction machine, the Case 580C Backhoe Loader can perform well in different engineering fields with its performance and functions. However, during use, users should always pay attention to the parameters and operating points to ensure safe operation and long life of the machine.