Easy to Understand! A Handy Guide to Changing a Bobcat Fuel Filter!

Changing a fuel filter on a Bobcat is one of the skills that every equipment maintainer must master. If you don't know ‘how to change a fuel filter on a Bobcat’, don't worry, this article will give you a detailed step-by-step guide on how to change a fuel filter on a Bobcat so that you can easily complete your maintenance tasks. Also, MyMROmarts online shop has engine fuel filters for sale to save you effort. Both beginners and veterans can place an order at the click of a button to make Bobcat equipment maintenance easier!

 

Why Should I Change My Bobcat Fuel Filter Regularly?

The fuel filter in Bobcat equipment is primarily responsible for filtering impurities from the fuel. So that the fuel input into the equipment is clean. It can effectively prevent impurities from entering the engine. Regular replacement of the fuel filter can avoid clogging of the fuel system and prolong the life of the engine. If the filter has not been replaced for a long time, it will lead to Bobcat equipment starting difficulties, increased fuel consumption, engine damage and so on. Replacing the fuel filter on time is a very important maintenance step.

 

How to Change Bobcat Fuel Filter? Detailed Steps Are Here!

Changing the fuel filter is not complicated. When you have the right steps, you can easily do it at home. Below is a detailed guide on how to do it:

 

1. Prepare Tools and a New Filter

Prepare the tools you need to change the fuel filter first. For example, filter spanner, oil basin, cleaning cloth, and so on. At the same time, it is very important to choose the right fuel filter. It is recommended to visit MyMROmarts online shop to buy fuel filters for Bobcat.

 

2. Switch off Bobcat Equipment

Before carrying out the replacement operation, always make sure that the equipment is completely switched off. Avoid subsequent accidental start-up during operation. It is also recommended that you operate the Bobcat in a well-ventilated area.

 

3. Locate the Fuel Filter

The fuel filter of Bobcat equipment is usually located on the fuel line near the engine. If you are unsure of the exact location, you can consult the Bobcat's owner's manual to find where the filter is located.

 

4. Loosen the Old Filter

Using a filter spanner, loosen the old filter by turning it clockwise. Note that a small amount of fuel may leak out during the process of loosening the filter. It is recommended that a fuel bowl be placed underneath to collect the leaked fuel.

 

5. Check and Clean the Mount

After removing the old filter, carefully wipe the mount with a clean cloth. Ensure that there is no residual oil or contaminants on the mount. This will not affect the installation of the new filter.

 

6. Installing the New Filter

Screw on the new fuel filter and tighten it clockwise. Please be careful not to use excessive force as this may damage the threads of the filter.

 

7. Start the Bobcat

Once installation is complete, start the Bobcat unit. Allow fuel to flow through the new filter and check for leaks. Once the filter is operating properly, the entire replacement process is complete.

 

Recommended Quality Fuel Filter for Bobcat

When shopping for a fuel filter, quality is key.MyMROmarts online shop offers a wide range of fuel filters for bobcat equipment models, such as the Bobcat s590 fuel filter. The filters here are made with a more durable filter media, which effectively filters out fine particles from the fuel.

 

Tips for Changing Your Fuel Filter

To make the fuel filter change smoother, here are some tips for reference:

1. Pre-fill the Fuel Filter

Before installing a new filter, it is recommended that you add some fuel to the filter first. This will speed up the process of refilling the system. Avoid air blockage after replacing the filter.

 

2. Use a Manual Primer Pump to Expel Air

After replacing the filter, ensure that there is no air trapped in the fuel system. Open the bleeder valve at the top of the filter housing and manually operate the primer pump. Pump until no more air comes out of the bleeder valve, then close the bleeder valve.

 

3. Pre-fill to the Tank Side Only

If you choose to pre-fill the new filter with fuel, be careful where you fill it. It is recommended that you only pour fuel into the tank side of the filter. This will prevent contaminants from entering the injection pump directly.

 

Knowing ‘how to change a fuel filter on a Bobcat’ is a fundamental skill every Bobcat owner should have. Changing fuel filters correctly and promptly will extend the life of your equipment and reduce unnecessary repairs. Choose high-quality fuel filters from MyMROmarts online shop, simply order, and enjoy excellent after-sales support and service. Act quickly to keep your Bobcat equipment in top condition!