How Do I Check the Hydraulic Fluid and Clean the Fuel Tank?

Have you ever experienced Bobcat equipment working unevenly or with reduced efficiency? Or ever wondered if the hydraulic system is working properly? Don't worry, today MyMROmarts is here to teach you two important maintenance skills: how to check your Bobcat hydraulic fluid and how to clean your Bobcat fuel tank. Mastering these tips will keep your Bobcat equipment operating efficiently for longer and will also save you money on repairs. If you're looking for Bobcat related engine parts, take a look at the MyMROmarts online shop for the right Bobcat parts for customers.

 

How to Check the Hydraulic Oil on a Bobcat?

Hydraulic fluid is critical to the proper functioning of Bobcat equipment. It helps keep the equipment stable under heavy loads and maximises the effectiveness of the hydraulic system. If the hydraulic fluid is not in sufficient quantity or is of poor quality, it can lead to a decline in the performance of your Bobcat equipment. Next, let's take a look at how to easily check your Bobcat's hydraulic fluid.

 

1. Stop and Wait for Cooling

Before checking the hydraulic fluid, first ensure that the hydraulic system has cooled down. This is because at high temperatures the hydraulic fluid expands, resulting in inaccurate measurements. Wait a few minutes for the hydraulic system temperature to cool down. This way you will get a more accurate hydraulic fluid level.

 

2. Locate the Hydraulic Oil Filler

The Bobcat hydraulic oil filler neck is usually located on the side or rear of the unit. The exact location will vary depending on the model. You can check the owner's manual for the location of the filler neck.

 

3. Use the Dipstick to Check the Oil Level

Once you have opened the hydraulic oil filler neck, take out the dipstick and check the level. Most Bobcat equipment is equipped with a level gauge that indicates the oil level. All you need to do is insert the level dipstick into the tank, then remove it and observe if the level is clearly marked on the dipstick. If the oil level is below the recommended minimum line, you need to top up the hydraulic fluid.

 

4. Checking the Quality of the Oil

In addition to checking the oil level, the quality of the hydraulic oil is equally important. If the oil becomes cloudy or has a strange odour, it indicates that the oil has deteriorated or that there are impurities in the hydraulic oil. It is then necessary to change the hydraulic fluid. If the fluid is very dirty, it is recommended that you use a filter to clean the system.

 

If you need to replace your Bobcat's fuel filter or clean parts related to the fuel system, the MyMROmarts online shop order bobcat parts online to help make maintenance and repairs on your equipment go smoothly.

 

How to Clean Bobcat Fuel Tank?

Cleaning your fuel tank is an important step in keeping your Bobcat equipment running well. Over time, dirt and deposits build up in the fuel tank. These deposits can affect the efficiency of your engine and even lead to breakdowns. Below, we provide you with easy ways to clean your Bobcat's fuel tank.

 

1. Switch off the Machine and Disconnect the Power Supply

Firstly, disconnect the battery power to ensure that the Bobcat equipment has been shut down. This will avoid any accidents during the cleaning process.

 

2. Empty the Fuel

Open the fuel tank drain valve and drain the fuel completely. If there is any fuel residue, do not pour it into the natural environment. Try to pour it into a designated recycling container to avoid contaminating the environment.

 

3. Remove and Clean the Fuel Screen

Next, remove the fuel tank screen and check for deposits. Gently clean the screen using a cleaner and a soft bristle brush. Check that the screen is not damaged or clogged. If the screen is damaged, remember to replace it with a new one.

 

4. Clean the Inside of the Fuel Tank

Clean the inside of the fuel tank with a specialised fuel tank cleaner to remove any adhering impurities. If you find any obvious rust or grease inside the fuel tank, you can use a soft cloth or sponge to wipe and clean it. After cleaning, wash it once more with clean oil. This way all cleaning agents are thoroughly rinsed out.

 

5. Refill and Check Fuel
Once cleaning is complete, reinstall the fuel screen and fill with fresh fuel. Recheck for fuel leaks and start the unit to check that the Bobcat is operating properly.

 

Whether it's checking the hydraulic fluid or cleaning the fuel tank, regular maintenance of your Bobcat equipment is essential to keep it running. With these simple actions, you can extend the life of your equipment and reduce maintenance costs. If you need the right engine parts during maintenance, remember to visit the MyMROmarts online shop!