How to Ignite Your Car?
Wiring to start: We often see it in movies, or when playing games (such as GTA), after snatching a car or car thief, they will draw a few wires from under the steering wheel, and start it as soon as they are connected. In fact, the principle is very simple. Find the live wire of the ignition switch, then connect the ignition wire and the live wire together, and then connect the starter wire to start the car. It’s just that this is a very early car. Now the car key has a password. It cannot be activated without a password.
Rubbing the car to start: turn the key to the start position, put the second gear, step on the clutch, push it to a certain speed, and release the clutch instantly, if it starts, you need to step on the clutch immediately, otherwise, rub twice and turn off the engine, generally speaking, it is rarely once successful.
Key start: This is the most common one. Almost all people who have driven a car have used it. Many articles on the Internet will teach you how to use it. What should be turned on first, then wait a few seconds, and then turn to where Wait for a few seconds and start directly. It is also the most commonly used starting method for most construction vehicles at present. The ignition switch cost is also relatively cheap, and it is also very convenient to use.
One-button start: At present, most small cars use a one-button start, which is more convenient and intelligent.
Signs of a bad ignition switch
The failure of the ignition switch will cause serious consequences because the ignition switch regulates the opening and closing of the ignition coil. If the ignition switch fails, the car will not start. Basically, the circuit adjusted by the key cannot be used.
In many cases, the ignition switch failure is caused by the long-term wrong operation method of the partners. Some new partners are a little anxious to drive, and a lot of processes are simplified when starting. Even inserting the key in the ignition switch directly from the park position to the ignition position. It should be known that the four gears of the ignition switch are progressive, the purpose is to let the electrical parts enter the working state one by one, and relieve the burden on the car battery caused by the instantaneous power-on. If you do not stop in other gears when starting the car, the load on the battery will be increased instantly, which will basically do great harm to the battery and the engine. In the long run, it will reduce the life of the battery and cause the engine to fail. start.
Therefore, a good starting method is to slowly turn the key to let the electrical accessories on the car enter the state one by one, and relieve the pressure on the battery power supply. With a one-button start car, you can press it first to connect the car to the power supply. Then press it further, and the light on the dashboard will light up, which is equivalent to the "ON" position. The car will automatically detect first, and the oil pump will build up the oil pressure to prepare for the ignition, and finally start the car.