What is Racor Marine 751000max 900ma Fg500 1000fg Fuel Water Separator?

What is Racor Marine Fuel Water Separator?

A Racor marine fuel water separator is a device designed to separate water and other contaminants from the fuel supply of a marine engine. This type of filter is commonly used in boats and other marine vessels to protect the engine from damage caused by water and other impurities in the fuel.

The Racor marine fuel water separator works by using a filter element that separates water and other contaminants from the fuel. The filter element typically contains a water-repellent material that separates the water from the fuel and directs it to a drain. The filtered fuel then flows through the filter and into the engine.

The Racor marine fuel water separator is a critical component of a marine engine's fuel system, as water and other impurities in the fuel can cause serious damage to the engine over time. By separating water and contaminants from the fuel, the Racor marine fuel water separator helps to ensure that the engine runs smoothly and efficiently, and that it is protected from damage.

MyMRO aftermarket cylinder blocks for sale.

What is Racor Fg500 1000fg Separator?

The Racor FG500 and 1000FG fuel separators are filtration systems designed to remove water, dirt, and other contaminants from diesel fuel, gasoline, and other hydrocarbon-based fuels.

These separators are typically used in marine, automotive, and industrial applications where fuel quality is critical for engine performance and longevity.

The Racor FG500 and 1000FG fuel separators use a centrifugal separation process to remove water and contaminants from the fuel. The fuel is spun at high speeds, causing the water and contaminants to be forced to the outside of the separator, where they collect in a collection bowl.

View to know more about cummins 5.9 rebuild kit.

The FG500 and 1000FG separators are available in various configurations and flow rates to meet the needs of different applications. They typically feature a spin-on design, making them easy to install and maintain.

The main differences between Racor Fg500 and 1000fg

The main differences between the two models are their flow rates and filtration capabilities.

The Racor FG500 is designed for smaller engines and has a maximum flow rate of 60 gallons per hour (227 liters per hour). It uses a two-stage filtration system to remove water and contaminants, with a 10 micron primary filter and a 2 micron secondary filter. The FG500 is also available with an optional heater to prevent fuel gelling in cold temperatures.

The Racor 1000FG is designed for larger engines and has a maximum flow rate of 180 gallons per hour (681 liters per hour). It uses a three-stage filtration system, with a 30 micron primary filter, a 10 micron secondary filter, and a 2 micron final filter. The 1000FG also has a built-in water sensor to alert the user when the water bowl needs to be drained.

We offer competitive prices fuel shutdown solenoid for customers worldwide.

What is Racor 751000max?

The Racor 751000MAX is a high-capacity fuel filter water separator system designed for diesel engines. It is a product of Parker Hannifin, a company that specializes in motion and control technologies.

The Racor 751000MAX features a spin-on filter element that efficiently removes water and contaminants from diesel fuel, preventing engine damage and fuel system wear. It has a maximum flow rate of 180 gallons per hour (681 liters per hour) and can handle fuel with a maximum viscosity of 15 cSt (centistokes).

The filter element of the Racor 751000MAX is made of Aquabloc II media, which is a multilayered, high-efficiency filtration material that removes contaminants down to two microns in size. The system is designed for easy installation and maintenance, with a clear bowl that allows for visual inspection of the filter element.