Why is the Screen Flashing and Beeping on a Kubota U35 Excavator

Common Cause Analysis

Screen flickering and beeping on your Kubota U35 Excavator can be caused by a variety of factors. Understanding these common causes will help to quickly diagnose and resolve the problem. Typically, the problem may involve the hydraulic system, the electrical system, a faulty sensor, or a software issue. We will analyze these common causes and their possible solutions in detail.

 

Low hydraulic oil level

Hydraulic oil plays a vital role in the proper operation of an excavator. If the hydraulic oil level is low, it may lead to insufficient pressure in the system, which in turn triggers the alarm system, causing the screen to flash and beep.

Check the hydraulic oil tank: open the lid of the hydraulic oil tank and check the level of the hydraulic oil. Make sure the oil level is within the manufacturer's recommended range.

Replenish Hydraulic Fluid: If you notice that the hydraulic fluid level is low, promptly replenish the proper amount of hydraulic fluid. Use hydraulic fluid that is compatible with the equipment to ensure proper system operation.

Check for leaks: Low oil levels can be caused by leaks. Check hydraulic lines, fittings and cylinders for signs of leaks. If leaks are found, repair or replace damaged parts promptly.

 

Electrical System Failure

Electrical system failures are another common cause of flickering screens and beeping. Problems with the electrical system may include loose connections, poor contact or damaged wires.

Check the wire harness and connectors: First check the wire harness and connectors for signs of wear, breaks, or looseness. Make sure all connectors are securely attached and free of corrosion.

Test Voltage: Use a multimeter to test the voltage of the electrical system to see if it is within normal limits. If the voltage is abnormal, you may need to check the condition of the battery and generator.

Check fuses and relays: Sometimes, malfunctions can be caused by blown fuses or faulty relays. Check and replace damaged fuses and relays.

 

Sensor failure

The Kubota U35 Excavator relies on a variety of sensors to monitor and control system functions. A faulty sensor may send an error signal, causing the screen to flash and beep. :

Use a diagnostic tool: use a specialized diagnostic tool to read the data from the sensors and check for error codes or abnormal signals.

Check sensor connections: Make sure that all sensor connectors are securely connected and not loose or corroded.

Replace faulty sensors: If a sensor is found to be faulty, replace it promptly. Use sensors that match the original to ensure proper system operation.

 

Software Failures

Modern excavators are often equipped with complex control systems that are controlled by software. Sometimes, software faults or outdated firmware can cause the excavator to exhibit unusual behavior, such as screen flashing and beeping.

Check the software version: access the excavator's control panel and check the current software version. Visit the official Kubota website to check if the latest firmware update is available.

Update Firmware: If there is an available firmware update, follow the manufacturer's instructions. Ensure that the power supply remains stable during the update process to avoid power outages in the middle of the process.

System reset: If the problem persists, consider resetting the control system to its default settings. This may resolve issues caused by software malfunctions.

 

If you have any need to replace Kubota aftermarket parts, you can log in MyMROMarts online shop for shopping, and you can contact and communicate with our online customer service for any questions, welcome to shop.

Troubleshooting Steps

When the screen on your Kubota U35 excavator is flashing and beeping, systematic troubleshooting steps can help to quickly locate the problem.

Check Hydraulic Fluid Level: Make sure the hydraulic fluid level is within the recommended range, replenish the hydraulic fluid and check for leaks.

Check electrical system: Check wire harnesses, connectors, fuses and relays to ensure the electrical system is working properly.

Diagnose Sensor Problems: Use a diagnostic tool to check the sensors to make sure they are working properly and replace faulty sensors if necessary.

Update and reset software: check the software version, update the firmware, and reset the system if necessary.

 

With the above detailed inspection and maintenance steps, you can effectively solve Kubota U35 Excavator screen flickering and beeping problems to ensure the normal operation and prolong the service life of the equipment.